Just like all animals, pigs need water, but Kune Kune pigs and nearly all pigs in general pose an interesting challenge when it comes to providing it. If there is a bowl of water available, they want to lay in it. They aren’t tall enough to drink from a stock tank, and, well, they can be pretty rough on equipment.
The best solution we have found is building our own pig waterers out of a food-grade 50-gallon barrel. Here are the steps and everything you will need to build one of these simple pig waterers.
Here is a list of the things you will need to complete the project:
Step 1: Cut Out the Hole
Using your cordless drill and the provided hole saw, drill a hole at nose height for the breed of pig you have. Our Kune Kune pigs walk with their heads much lower than commercial breeds. I aim for the nipple to sit about 6–10 inches from the bottom of the barrel.
You can go shorter if the waterer is going in a pen with younger piglets, or go on the higher side if the waterer is only for adult pigs.

Step 2: Insert the Fittings
After the hole is cut, take the brass fitting and nut and insert the threaded side of the brass fitting into the hole from the outside of the barrel. Make sure the provided rubber O-rings are on the outside of the barrel.
Then, reach into the barrel and thread on the brass nut with the rubber O-ring. This can get tricky if your barrel has a top on it. We usually cut the top off ours to make it easier. Barrels with a removable lid make this process super simple.

Step 3: Thread in the Nipple Waterer
Once your brass fitting is tight, it’s time to take your plumber’s tape and wrap it around the threads of the pig nipple waterer 5–7 times. Then, screw the nipple into the brass fitting until snug.
Fill the water barrel and check for leaks.
If there is a leak, either tighten the nipple on the brass fitting or, if that doesn’t work, add more plumber’s tape to the threads. Be sure to check for leaks before you fill the barrel all the way up.

Watch how we care for our pigs during the summer and how we made the waterer in this video 👇🏼

Leave a Reply